Industrial Pressure Transmitters

Our pressure transmitters adopt different sensing technologies as strain gauge, piezoresistance ceramic sensor and diffused silicon sensor chips. It is widely sued to measure the pressure of liquids and/or gases. 

Free samples are available for your testing and evaluation before purchasing.


Welcome to contact us for FREE samples! Email to: info@cheemi-tech.com or Get Free Samples Now!

Case Type Model Range Output Accuracy Input voltage Electric connector Process connector Datasheet Download
CMPT124G-128 0….10Mpa to 0….150MPa 2mV/V; 3.33mV/V ±0.5%FS 10VDC 5PIN, 6PIN 1/2″-20UNF, M14×1.5, M18×1.5
CMPT124B-212 -1….0….600bar 4-20mA; 0-10V; 0-5V, 0.5-4.5V; 485communication 1.5mV/V; 2mV/V (CMPT124G-212) 0.5%FS; 0.25%FS 12~36VDC ( 4-20mA,0-10V, 0-5V output ) 5 V DC ( 0.5-4.5V output ) 10V DC ( 1.5mV/V , 2mV/V output ) Hirschman(DIN), M12(4pins), 5pins(IP67), gland cable, direct cable optional(IP68) G1/4, G1/2, 1/2NPT, 1/4NPT, 1/4
CMPT124B-214 -1- 0-10bar 4-20mA(2 Wire), 0-5V; 0.5-4.5V ±0.5%FS 24(12~36)VDC (Amplify signal); 5VDC Hirschman(DIN), M12 & 4 PIN, Bendix connector, cable, Etc (Customer design) G1/2, 1/2BSP, 1/2NPT, M22 and etc
CMPT124B-215 0….1bar to 0….1000bar 4-20mA(2 Wire), 0-5V; 0.5-4.5V ±0.5%FS 24(12~36)VDC (Amplify signal) 1/2NPT conduit cable G1/4, G1/2, 1/2NPT, 1/4NPT, M12*1.5,etc
CMPT124B-216 0….1bar to 0….1000bar 4-20mA(2 Wire, alarm optional ) ±0.5%FS 24(12~36)VDC Hirschman(Big DIN) G1/4, G1/2, 1/2NPT, 1/4NPT, M12*1.5,etc
CMPT124B-217 -1…0…100bar 4-20mA(2 Wire), 0-5V; 0.5-4.5V ±0.5%FS 24(12~36)VDC Hirschman(DIN), M12,4pin, Bendix connector, cable, etc (Customer design ) 1″, 1.5″, 2″
CMPT124B-218 0….1000bar 4-20mA(2 Wire), 0-5V; 0.5-4.5V (3 wire) ±0.5%FS 24(12~36)VDC Hirschman(DIN), M12,4pin, Bendix connector, cable, etc (Customer design) G1/4, G1/2, 1/2NPT, 1/4NPT, M12*1.5
CMPT124B-234 0….1bar to 0….800bar 0.5-4.5V; 0-5V;0.5-5V, 1-5V; 4-20mA or customization ±0.5%FS 24(5-36V)DC Packard connector or customization 7/16-20UNF, 1/4NPT, 1/8NPT (Optional)
CMPT124B-280 0~1bar; 0~2000bar 4-20mA ±1.0%FS 12~36VDC Terminal Block ExiallCT4
124B-2088 0~50KPa~35MPa 4-20mA, HART, RS232, RS485 optional with external supply 0.2%FS; 0.5%FS Battery or external supply 24VDC 2 wire Terminal Block G1/2, M12, M20x1.5 (optional)
CMPT124BG-210 0-50bar~6000bar 4-20mA,0-10V, 0-5V, 0.5-4.5V (PT124B-210) ; 1.5mV/V , 2mV/V (PT124G-210) Optional 0.5%FS; 1%FS 24VDC ( 4-20mA,0-10V, 0-5V output ) 5 V DC ( 0.5-4.5V output ) 10V DC ( 1.5mV/V , 2mV/V output ) Optional Hirschman(DIN), M12(4pins) , 5pins , gland cable, direct cable optional G1/4, G1/2, 1/2NPT, 1/4NPT, M12*1.5(Customer design)
CMPT124BG-211 0~100bar ~6000bar 4-20mA , 0-5V , 0-10V; 0.5-4.5V; 10-30mV (PT124G-211) ±0.5%FS 12-36VDC (24VDCTypical); 5VDC Hirschman(DIN), M12(4pins) , 5pins , gland cable, direct cable optional G1/4, G1/2, 1/2NPT, 1/4NPT, M12*1.5 (Customer design)
CMPT124BG-213 0~5bar~50bar (0 - 5000Kpa) 4-20mA,0-10V, 0-5V, 1-5V, 0.5-4.5V (PT124B-213) ; 1.5mV/V , 2mV/V (PT124G-213) 0.5%FS; 0.25%FS 24(12-36)VDC ( 4-20mA,0-10V, 1-5V, 0-5V output ) 5V DC ( 0.5-4.5V output ) 10V DC ( 1.5mV/V , 2mV/V output ) Hirschman(DIN), M12(4pins) , 5pins , gland cable, direct cable optional G1/4, G1/2, 1/2NPT, 1/4NPT, M12*1.5(Customer design)
CMPT124G-211 0-7000psi <9KΩ ±0.5%FS 5VDC 4P4C Registered jack 11/16-24UNEF
Need Help
You have a Measurement problem, we have the Sensing solution.
CONTACTS

Tel:+86(0)25-8599 6365
MP:+86-188 5113 2317
info@cheemi-tech.com
WhatsApp: +86-188 5113 2317
Wechat: 13675125516
N22, Xianlongwan, Xianyin South Road, Qixia District, Nanjing, China.

Copyright © 2015-2021 CHEEMI TECHNOLOGY CO.,LIMITED.All Rights Reserved. Current Sensors Sitemap